Support for JLM Audio Kits
Moderator: Joe Malone
Joe Malone
Site Admin
Posts: 2081 Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:
Post
by Joe Malone » Fri Mar 02, 2007 8:21 pm
JLM PEQ1 passive EQ PCB as shown connected to our dINgo PCB but it can also we wired into our BAD mic pre to make a mic pre EQ.
Joe
JLM Audio
Capturing Audio without Injury
discobeet
Posts: 9 Joined: Wed Mar 14, 2007 7:42 am
Post
by discobeet » Wed Mar 14, 2007 8:14 am
sign me up for two. here's the keys to my car and the deed to my house. i think you'll have a some new fans pretty quick.
poserp
Posts: 40 Joined: Thu Mar 08, 2007 10:11 am
Location: Los Angeles, California
Post
by poserp » Thu Mar 15, 2007 1:19 am
What are the dimensions of the main circuit board?
poserp
Posts: 40 Joined: Thu Mar 08, 2007 10:11 am
Location: Los Angeles, California
Post
by poserp » Thu Mar 15, 2007 6:10 am
...Oh, and another quick one -- would there be any issue with mounting the knobs off the board and running wires? If the circuit board is longer than 5 inches or so then I'd probably want to mount it front-to-back instead of flat against the front panel.
gevermil
Posts: 2 Joined: Thu Mar 15, 2007 7:47 am
Post
by gevermil » Thu Mar 15, 2007 10:39 am
When are these beauties going to be availible
and at what approx $$ ?
gary
synthi
Posts: 3 Joined: Wed Mar 21, 2007 10:43 am
Location: Madrid, Spain
Post
by synthi » Wed Mar 21, 2007 11:28 am
wow!
discobeet
Posts: 9 Joined: Wed Mar 14, 2007 7:42 am
Post
by discobeet » Thu Apr 05, 2007 1:31 pm
maybe i should check this forum / post every day.
Moogus
Posts: 19 Joined: Sat Feb 24, 2007 12:02 am
Location: Diego Garcia
Post
by Moogus » Fri Apr 06, 2007 2:24 am
I know I dont have to point out the obvious, but these things fking rock. You guys arent going to know what hit you when you finally get to hear them.
M@
Permission to buzz the tower DENIED!!
chrisp
Posts: 184 Joined: Sun Mar 04, 2007 11:46 am
Location: Sydney, Australia
Post
by chrisp » Fri Apr 06, 2007 4:34 pm
Moogus wrote: these things fking rock. You guys arent going to know what hit you when you finally get to hear them.
Matt, you're a tease, you know that don't you.
Less time teasing = more time testing and less time TILL WE GET THEM
Chris P
---------------------------------------------------------
I do lots of things. I believe eclectic skills are best.
Bear
Posts: 4 Joined: Fri Apr 20, 2007 12:41 am
Post
by Bear » Fri Apr 20, 2007 11:20 pm
Very, very awesome. More on the I/O? Dingo looks cool, but you wonder about hooking this up to mic pres in the arsenal or maybe using this for the front and building a classic tube back-end for makeup.
Bear
Moogus
Posts: 19 Joined: Sat Feb 24, 2007 12:02 am
Location: Diego Garcia
Post
by Moogus » Fri Apr 20, 2007 11:31 pm
Well probably be making a tube amp for it at some point. But really, the solid state version sounds better on more things, so thats our 'default' pultec.
The dINgO kit is up on the website now btw. The peq kits wont be toooo much longer...
M@
Permission to buzz the tower DENIED!!
just.sounds
Posts: 7 Joined: Fri Apr 20, 2007 9:07 pm
Post
by just.sounds » Sat Apr 21, 2007 1:45 am
Nice!
What kind of beast will the sontec type eq be?
I'm very curious! this line of kits have great potential i think.
Moogus
Posts: 19 Joined: Sat Feb 24, 2007 12:02 am
Location: Diego Garcia
Post
by Moogus » Sat Apr 21, 2007 12:53 pm
Itll be like a real sontec, but better.
M@
Permission to buzz the tower DENIED!!
just.sounds
Posts: 7 Joined: Fri Apr 20, 2007 9:07 pm
Post
by just.sounds » Sat Apr 21, 2007 6:35 pm
With mastering style switched controls or the possibility to do that?