JLM AUDIO

so is it possible to build a stand alone MAC so you can do the following

mic -> MAC -> DINGO -> BA -> audio interface of your choice?

if so then im off to take a cold shower.

woah!!! smasha exists!!

aarrgghh!! i got a steel one from jaycar and it sucks. it has crap in the way of things. altronics i go!! but the good news is my second baby animal passed its voltage testing tonite!!! and in the next day or so i should have my 3rd one here ready yo be soldered!! these kits are a breeze and pleasur...

I hadnt soldered anything for over 10 years. I went to dick smith and got a doorbell kit to practice with. Then I ordered a kit from Joe. I got a baby animal kit and saw how small it really was and i thought this is going to be a tough assignment. I was very wrong. The PCBs that Joe has put together...

Guys,

where are the best places to get 1RU rack cases?? I need to stuff my baby animal into its natural habitat. Im located in Melbourne Australia.

Do jaycar have these? Ive only ever seen the front panel in there.

thanks.

thanks chris. makes some sense to me now.

To get the ball rolling on the mic pres, im looking at building a matched pair for overhead mics to use with drums. Anyone using baby animals for overheads and do they have an opinion on the opamp/transformer combo they recommend?

Hello all, Ive built my first jlm baby animal pre amp and have it running and I am very pleased with the results (understatement). The initial pre i built used the OPA2604 & JLM14 combination. Now I'd like to build a few more. The pres are to be used for the standard reqordings - drums, guitars, bas...

wOOHOO!!

It works.

need to put it into its final rack mount chasis and then its time to order more!!

thanks joe!

ahh thanks joe..

now i know what i'll need to do when i make more pres with those diff opamps.

those plastic washers do a great job :). As im going to be running my BA on 48v I think i need to remove a couple of parts. I soldered on the *10k and #10k resisters. I take it i need to remove these altogeter and then connect C to E on both BD681 and then also add a connection from pin 4 to 7 on my...

What do most people use to mount them off the board? Included in my kit were a couple of plastic washer type looking things which are beige in colour. is this what i use?? Yes use sidecutters or a knife to cut the tube part of them to turn them into flat plastic washers that will sit under the JLM1...

hi guys, these may be some noob questions, so bear with me. ive basically built my baby animal pre except I havent attached the input transformer. (I am using the jlm14). What do most people use to mount them off the board? Included in my kit were a couple of plastic washer type looking things which...

thanks joe..

is that chart for the benefit of people adding the variable impendance whilst the values from the schematic are for no impendance?

I recently ordered JLM Baby Animal kit. I am using the OPA2604 Opamp in conjunction with the JLM14 Input transformer. Looking at the chart for the value of CL it states to use 390pF. Looking at the schematic it states that I should be using 220pF. Anyone able to fill me in as to what I should use or...

Maybe a FAQ for each product would be beneficial? Im sure joe has to repeat many answers over and over again (especially with me now in town!! )