Search found 4 matches

by Mark S
Wed Feb 02, 2011 10:28 am
Forum: JLM Audio Kits
Topic: AC/DC & POWERSTATION KIT BUILD THREAD
Replies: 350
Views: 802805

Re: AC/DC & POWERSTATION KIT BUILD THREAD

Hi Joe, Thanks for your quick reply. I found the problem. It was me. I was testing the supply from left to right ( 5 to 1),and from top to bottom (48v to neg #2). Of course, this would make it so that the probe was testing 48v and I was turning the pot for Neg #2. And that would make it so that #3 w...
by Mark S
Wed Feb 02, 2011 5:27 am
Forum: JLM Audio Kits
Topic: AC/DC & POWERSTATION KIT BUILD THREAD
Replies: 350
Views: 802805

Re: AC/DC & POWERSTATION KIT BUILD THREAD

Hi, I have the powerstation built and fired up. The problem is that 4 of the 5 pots for adjusting the voltage are not doing anything. The only one that is working correctly is the center pot (#3). This morning I took the pots out and measured them with the ohmmeter, they all work as they should. I p...
by Mark S
Sat Aug 21, 2010 9:14 am
Forum: JLM Audio Kits
Topic: DINGO PCB and kit BUILD THREAD
Replies: 112
Views: 366869

Re: DINGO PCB and kit Now Available

Joe, Well, its gonna take a bit of doing for the schematics. I have them all, but they are full size blueprint type drawings. I will try to explain this and be as descriptive as possible..... A mic or line input (via Xformer) gets the signals into the unit. The 6 cards that make up the micpre/filter...
by Mark S
Thu Aug 19, 2010 8:45 am
Forum: JLM Audio Kits
Topic: DINGO PCB and kit BUILD THREAD
Replies: 112
Views: 366869

Re: DINGO PCB and kit Now Available

Hi All, I am racking up a Neve 83010 micpre/comp/eq. I am at the point where I need to think about how these will interface with the outside world. The unit is set up for mic/line input (via the supplied Belclere Xformers), a balanced insert send/return, and main output, with a 10k audio taper pot t...