Search found 5 matches
- Sun Aug 11, 2019 8:17 am
- Forum: JLM Audio Kits
- Topic: VUPPM500 KIT Build Thread
- Replies: 29
- Views: 68561
Re: VUPPM500 KIT Build Thread
Both have been built and calibrated successfully! The build is pretty simple, even without step by step instructions. Ran into a few snags on the first build but the 2nd one was much faster to assemble. A couple of pointers: Display PCB 1. Long lead of the LEDs go through the pad with a square. 2. S...
- Thu Aug 08, 2019 2:40 am
- Forum: JLM Audio Kits
- Topic: VUPPM500 KIT Build Thread
- Replies: 29
- Views: 68561
Re: VUPPM500 KIT Build Thread
Success! Now I just need to calibrate it.
Also with respect to passing through audio and have it have both input & output. Is it possible to do this on a normal VPR Rack like a CAPI 511-VPR?
Thanks for your help!
Also with respect to passing through audio and have it have both input & output. Is it possible to do this on a normal VPR Rack like a CAPI 511-VPR?
Thanks for your help!
- Wed Aug 07, 2019 6:11 pm
- Forum: JLM Audio Kits
- Topic: VUPPM500 KIT Build Thread
- Replies: 29
- Views: 68561
Re: VUPPM500 KIT Build Thread
Oops, I think I figured it out. When joining the LED PCB to the MAIN PCB I only soldered together one side. For some reason I wasn't thinking and thought it was for just holding it together, but it actually is to connect all the components and LEDs. Go figure when building it at 1am. Will bridge the...
- Wed Aug 07, 2019 3:58 pm
- Forum: JLM Audio Kits
- Topic: VUPPM500 KIT Build Thread
- Replies: 29
- Views: 68561
Re: VUPPM500 KIT Build Thread
So the unit is built, but it looks like it's only outputting signal to the left meter. When I try to go into test mode it doesn't seem to do anything. Also when pressing the middle and right switches (peak switches) it doesn't appear to do anything either. Any thoughts on what went wrong? Going to g...
- Wed Aug 07, 2019 5:21 am
- Forum: JLM Audio Kits
- Topic: VUPPM500 KIT Build Thread
- Replies: 29
- Views: 68561
Re: VUPPM500 KIT Build Thread
Thanks for the add Joe! I'm currently putting together the first of 2 VUPPM500 modules. I've assembled all of the PCB's but haven't put it together yet. A couple of questions: 1. When connecting the LED PCB to the MAIN PCB, do you recommend using excess leads from resistors to connect it together or...