Thanks Joe appreciated
I'll take the rca gnd to both inverting and shield
Search found 11 matches
- Mon Feb 27, 2017 2:53 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
- Fri Feb 24, 2017 10:09 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
HI Joe,
Well I got it working with a 1/4 jack so it must have been dodgy connections with RCA. Just wanted to confirm that using the on board connections for audio in. Live to non inverting, and rca and does that connect to both inverting and gnd/shield?
Or just shield?
thanks mate
Well I got it working with a 1/4 jack so it must have been dodgy connections with RCA. Just wanted to confirm that using the on board connections for audio in. Live to non inverting, and rca and does that connect to both inverting and gnd/shield?
Or just shield?
thanks mate
- Sun Feb 05, 2017 9:41 am
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
Thanks for feedback appreciated mate.
Will do
Will do
- Sat Feb 04, 2017 2:59 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
Hey Joe
Thanks mate, here are the measurements pin to gnd
Thanks mate, here are the measurements pin to gnd
- Thu Feb 02, 2017 6:07 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
Ok well diode on d1 and d4 , d2 jumper. D3 ommited and3k3 resistor above d2 ommited also.
Still no joy appears to be no signal at output
Still no joy appears to be no signal at output
- Thu Feb 02, 2017 4:57 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
Hey Joe,
Oops!!! :/ sorry I was focused on not having the diodes as it's
Rectified VU!
Ok so I have
Jumper on D2
Nothing on D3
Do I need a diode on both D1 and D4 or just D1 sorry for that!
Oops!!! :/ sorry I was focused on not having the diodes as it's
Rectified VU!
Ok so I have
Jumper on D2
Nothing on D3
Do I need a diode on both D1 and D4 or just D1 sorry for that!
- Wed Feb 01, 2017 8:36 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
Hey Joe, Wondering if you could give me some pointers. I've completed one of the buffer boards and connected it to approx 17vdc via two batteries to sifam vu I have omitted the two diodes and one resistor as per instructions. I've got a test tone that is measuring around 1.3v issue is when connected...
- Tue Dec 20, 2016 8:02 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
Hey Joe Thanks for your reply appreciated mate! Ok, so if I'm reading It correctly. The two faston are for signal only, not for power? E.g. No power source needs to go to VU itself So I would have 12-36ish vdc into the buffer board. Audio Output of buffer board into the two faston tabs on back on VU...
- Fri Nov 18, 2016 6:02 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
Hey Joe, Thanks very much for your reply mate. Ok, so my Sifam AL29W arrived today http://www.sifammeters.com/Audio_Level/ALPresentor.htm This is going to show my stupidness but I'm not sure how I connect it to the buffer board??? There is two faston terminals on the VU meter. One marked + and other...
- Tue Nov 15, 2016 6:38 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
Hi Joe,
Thanks for reply appreciated mate. What is the rough current draw of a buffer board overall? Im thinking of splitting 1x12VAC (via bridged rectifier) secondary rated at0.8A between both boards would that suffice?
Cheers mate
Thanks for reply appreciated mate. What is the rough current draw of a buffer board overall? Im thinking of splitting 1x12VAC (via bridged rectifier) secondary rated at0.8A between both boards would that suffice?
Cheers mate
- Thu Nov 10, 2016 8:35 pm
- Forum: JLM Audio Kits
- Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
- Replies: 144
- Views: 438554
Re: VU BUFFER & PEAK LED KIT BUILD THREAD
Hi Guys, I just got a VU Buffer and peak led kit to use with a SIFAM AL29W which should land shortly! I have never wired up a VU before so I apologise if its a stupid question. In relation to taking a audio signal into the VU meter via the board do I just split the audio output coming from the outpu...