JLM AUDIO

"Unlinked, at -5db of gr, i have the same level on output on the 2 comps, and when Linked the good one jump to -3 dB of gr and the faulty one -4db of gr and with 1 dB of difference on the output. " This last example was at 10:1 both sc. flat and the difference of 1db on the output was between each o...

I've just align the 2 comps with the good la 500, and again everything's fine with just this changement, the faulty ones now see 3:1 and 5:1 ratios. La 500 good back to good unit, and faulty la back to faulty unit. I've linked the comps, at 3-1 ratio sc. flat and the good one returned immediatly to ...

I have +14.95 between pin 2 and pin 4 and -14.95 between pin 2 and 8 of the idc on the mac pcb

Thank you Joe

[Joe] You are sure the relay is clicking in and you are not in permanent bypass? The makeup turns up the output level in GR or VU? Yes sure. 10-1 ratio works well and yes the makeup turns up the output level in gr and vu [Joe] Very strange as the ratios are only set on the MAC PCB. Have you tried sw...

And with the non working one, when the unit is set to sc flat, gr, 3:1, and cranking up the threshold, there's no audible compression, and the meter doesn't move but there's a big increase in harmonics.

Thank you. Jérôme.

Hi Joe thanks for your response. For the la 500 that is working i have a slight increase in power when engaged, and perfectly the same between gr and vu. For -9dbfs i have -12,46 dbfs on bypass and -12,02 dbfs on vu and gr. Since i have this same lost of 3db in my chain with a purple audio comp, i t...

Hi all, I've finished my 2 la500, was a very easy and excitement project! I'm a newbie in DIY, and speak french... (So if i could do it...) :D I've just finished the calibrating process and one is just perfect, everything's ok, sounds very good, but the second one doesn't respond to the 3:1 ratio at...