Full Everything BA4 kit with fully milled holes in front and back panel with lasered text.

1 x BA4 extruded front 1 unit high rack case with lasered front panel and case.
4 x 3 pin Male XLR.
4 x 3 pin Female XLR.
1 x DC connector.
16 x self tapper screws.
2m x Shielded cable.
1m x red hook up wire.
1m x black hook up wire.
1m x Green hook up wire.
1m x Yellow hook up wire.
4m x Solder.
4 x 3mm RED Bezel Chrome.
1 x 3mm Green Bezel Chrome.
1 x Large toggle switch (2 nuts, 1 flat washer, 1 lock washer).
4 x chicken head knobs.
1 x 10k.
1 x 48v 380mA SMPS power supply.

4 x Parts for Baby Animal PCB + JLM14 + JLM99v
	
	1 x JLM14
	6 x Gold Sockets
	1 x JLM99v
	
	1 x JLM Baby Animal PCB
	3 x Toggle DPDT PCB mount
	1 x 10 pin IDC PCB mount
	1 x DIP 8 IC Socket
	1 x 3mm Red LED
	1 x 3mm Bezel
	1 x Rev log 10k pot
	1 x pot NUT for rev log pot
	1 x pot Washer for rev log pot
	5 x 470uF 50v Low ESR
	1 x 330uF 63v Low ESR 
	1 x 0.1uF 63v beads
	1 x 220pF
	2 x 47pF ceramic cap
	1 x 10R CARBON
	2 x 51R
	1 x 68R
	1 x 120R
	3 x 470R
	3 x 6k8
	10 x 10k
	1 x 27k
	1 x 220k
	1 x 3way terminal block
	2 x 2way terminal block
	1 x 1x4 jumper pins
	4 x computer jumpers

2 x DI kits.
	1 x JLM DI PCB
	1 x TRS socket PCB mount with DPDT switch
	1 x Nut for TRS socket
	1 x 8 pin machined IC socket
	1 x OPA2604 Burr Brown opamp
	2 x 100uF 50v Bi Polar Caps
	1 x 100uF 63v 105 degree electro cap
	3 x0.1uF 50v caps
	2 x 51R
	2 x 300R
	2 x 100k
	4 x 2.2Meg
	1 x 10pin IDC Socket
	2 x 3way terminal blocks
	2 x 10way IDC plugs and 
	1 x 10way flat cable in parts